Tutti i prodotti Alpe Adria Textil:
Arter® GT
Specifiche tecniche
| ARTER® GT |
|
|||||||||||||||
| um | 35-35 | 50-50 | 80-80 | 100-50 | 100-100 | 120-120 | 150-50 | 150-150 | 200-50 | 300-50 | 400-50 | 500-50 | 600-50 | |||
| mass per unit area |
g/m2 | 150 | 180 | 260 | 270 | 340 | 400 | 360 | 490 | 430 | 570 | 720 | 860 | 1010 | ||
| tensile strength MD |
kN/m | 40 | 55 | 85 | 110 | 110 | 130 | 170 | 170 | 220 | 330 | 430 | 530 | 630 | ||
| tolerance | -5 | -5 | -5 | -10 | -10 | -10 | -20 | -20 | -20 | -30 | -30 | -30 | -30 | |||
| elongation MD | % | 10,0 | 10,0 | 10,0 | 10,0 | 10,0 | 10,0 | 10,0 | 10,0 | 10,0 | 10,0 | 10,0 | 10,0 | 10,0 | ||
| tolerance | ± 2,5 | ± 2,5 | ± 2,5 | ± 2,5 | ± 2,5 | ± 2,5 | ± 2,5 | ± 2,5 | ± 2,5 | ± 2,5 | ± 2,5 | ± 2,5 | ± 2,5 | |||
| tensile strength CMD | kN/m | 40 | 55 | 85 | 55 | 110 | 130 | 55 | 170 | 55 | 55 | 55 | 55 | 55 | ||
| tolerance | -5 | -5 | -5 | -5 | -10 | -10 | -5 | -20 | -5 | -5 | -5 | -5 | -5 | |||
| elongation CMD |
% | 10,0 | 10,0 | 10,0 | 10,0 | 10,0 | 10,0 | 10,0 | 10,0 | 10,0 | 10,0 | 10,0 | 10,0 | 10,0 | ||
| tolerance | ± 2,5 | ± 2,5 | ± 2,5 | ± 2,5 | ± 2,5 | ± 2,5 | ± 2,5 | ± 2,5 | ± 2,5 | ± 2,5 | ± 2,5 | ± 2,5 | ± 2,5 | |||
| tensile at 2% MD |
kN/m | 8 | 11 | 17 | 20 | 20 | 24 | 28 | 28 | 46 | 70 | 85 | 95 | 120 | ||
| tolerance | kN/m | -2 | -2 | -2 | -2 | -2 | -2 | -2 | -2 | -2 | -5 | -5 | -10 | -10 | ||
| tensile at 2% CMD |
kN/m | 9 | 13 | 19 | 13 | 22 | 26 | 13 | 30 | 13 | 13 | 13 | 13 | 13 | ||
| tolerance | kN/m | -2 | -2 | -2 | -2 | -2 | -2 | -2 | -2 | -2 | -2 | -2 | -2 | -2 | ||
| tensile at 3% MD |
kN/m | 11 | 15 | 26 | 28 | 28 | 33 | 36 | 36 | 70 | 90 | 105 | 125 | 150 | ||
| tolerance | kN/m | -2 | -2 | -2 | -2 | -2 | -2 | -2 | -2 | -2 | -5 | -5 | -10 | -10 | ||
| tensile at 3% CMD |
kN/m | 12 | 18 | 28 | 18 | 30 | 36 | 18 | 39 | 18 | 18 | 18 | 18 | 18 | ||
| tolerance | kN/m | -2 | -2 | -2 | -2 | -2 | -2 | -2 | -2 | -2 | -2 | -2 | -2 | -2 | ||
| tensile at 5% MD |
kN/m | 19 | 25 | 40 | 45 | 45 | 54 | 72 | 72 | 105 | 150 | 165 | 185 | 220 | ||
| tolerance | kN/m | -2 | -2 | -3 | -3 | -3 | -3 | -3 | -4 | -5 | -5 | -10 | -10 | -10 | ||
| tensile at 5% CMD |
kN/m | 20 | 28 | 43 | 28 | 48 | 57 | 28 | 75 | 28 | 28 | 28 | 28 | 28 | ||
| tolerance | kN/m | -2 | -2 | -2 | -3 | -3 | -3 | -2 | -2 | -2 | -2 | -2 | -2 | -2 | ||
| creep at 60% of tensile strength |
kN/m | 21 | 30 | 48 | 60 | 60 | 72 | 90 | 90 | 120 | 180 | 240 | 300 | 360 | ||
| long term resistance MD |
% | 2 | ||||||||||||||
| standard mesh size |
mm | N = narrow; B = 4 x 4; C = 2 x 2 | ||||||||||||||
| standard yarns | HIGH TENACITY POLYESTER* | |||||||||||||||
| polymeric coating |
NO | |||||||||||||||
| roll width | m | 5,3 | ||||||||||||||
| roll length | m | 100 | 50 | 50 | 50 | 50 | ||||||||||
| loading space-12m truck |
m2 | 40.000 | 40.000 | 40.000 | 38.000 | 35.000 | 35.000 | 35.000 | 30.000 | 25.000 | 20.000 | 15.000 | 12.000 | 10.000 | ||
| * on request Polypropylene – Glass Fiber – PEN – PVA | ||||||||||||||||
| With fibres different from polyester the values at 2, 3 and 5% ARE NOT VALID. | ||||||||||||||||
| All the values are theoretical and have been got from laboratory tests averages. | ||||||||||||||||
| Alpe Adria Textil Srl reserves for itself the right to modify, without any notice, technical and aesthetic characteristics of its products based on continuous technological evolution. | ||||||||||||||||
